Differences between revisions 55 and 91 (spanning 36 versions)
⇤ ← Revision 55 as of 2017-08-05 20:03:27 →
Size: 4627
Editor: TunayDurmaz
Comment:
← Revision 91 as of 2019-11-01 14:27:54 → ⇥
Size: 6787
Editor: TunayDurmaz
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
## page was renamed from EMAN2/COMPILE_EMAN2_ANACONDA
Line 2: Line 3:
These instructions are for building with '''!NumPy v1.13'''.
Line 3: Line 5:
Note that even with a source build it may be difficult to get this working on systems with very old operating system installs. We normally try to support OS versions 6-7 years old. Please report any problems. EMAN2 source lives on !GitHub, downloading the source is part of the instructions below. Since EMAN2 uses Anaconda for its base environment, please follow the instructions below for a painless compile from source. If you go 'off script' you're on your own!

Note that even with a source build it may be difficult to get this working on systems with very old operating system installs. We normally try to support OS versions as much as 5-7 years old. Please report any problems.

== GPU Support ==
For features which support the GPU, please complete the source install instructions below, then follow the [[EMAN2/Install/BinaryInstallAnaconda#GPU|GPU instructions]] from the binary installation page.
Line 6: Line 13:
Line 9: Line 15:
=== Linux Clusters ===
The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the [[EMAN2/Install/BinaryInstallAnaconda|binary install page]]. Those instructions should also work with either of the source-based installations below.
Line 10: Line 19:
 1. Download and install [[https://conda.io/miniconda.html | Miniconda2]] - make sure you don't get the Python3 version
 1. Make sure that you have added miniconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]]. 		 1. Download and install '''Miniconda2-4.4.10''' for [[https://repo.continuum.io/miniconda/Miniconda2-4.4.10-Linux-x86_64.sh|Linux]] or [[https://repo.continuum.io/miniconda/Miniconda2-4.4.10-MacOSX-x86_64.sh|Mac OSX]].
  1. For existing installations install conda 4.5.
  {{{
conda install "conda>=4.5.2" -c defaults
}}}

 1. Make sure that you have added '''miniconda2/bin''' as the '''first element''' in your '''PATH''', and that you do not have '''LD_LIBRARY_PATH''' or '''PYTHONPATH''' set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.

 1. '''Install dependencies''', click [[https://github.com/cryoem/eman-deps-feedstock/blob/e8c31645c2e263efeeff232a7aa8a1e7eea65479/recipe/meta.yaml#L11-L42|here]] for conda dependencies
Line 14: Line 29:
cd <path-to-eman2-source> conda install cmake=3.9 -c defaults
conda install eman-deps=14 -c cryoem -c defaults -c conda-forge
}}}

 1. '''Checkout EMAN2 code''' from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
 {{{
cd <path-where-you-want-eman2-source> # eg - $HOME/src
Line 16: Line 37:
 }}}
 1. Install dependencies		 # this will create an eman2 folder containing the current source code from the master branch
}}}

 1. '''Create a build directory''' (out-of-source builds are recommended).
Line 19: Line 42:
conda install eman-deps -c cryoem -c defaults -c conda-forge # Mac OSX
conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
 }}}
 1. Create a build directory (out-of-source builds are recommended). 		mkdir <build-directory> # eg- $HOME/src/eman2-build
cd <build-directory>
cmake <path-to-eman2-source> # - eg $HOME/src/eman2. On linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
   * Rerun cmake.

 1. '''Build EMAN2'''
Line 24: Line 52:
cd <build-directory>
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.
   * Rerun cmake.
 1. Build EMAN2 {{{
Line 34: Line 54:
 }}}
 1. You may also wish to run 		 }}}

 1. You may also wish to run
Line 42: Line 63:
 1. Download and install [[https://www.continuum.io/downloads | Anaconda2]] - make sure you don't get the Python3 version
 1. Make sure that you have added anaconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]].
1. Download and install '''Anaconda2-5.1.0''' for [[https://repo.continuum.io/archive/Anaconda2-5.1.0-Linux-x86_64.sh|Linux]] or [[https://repo.continuum.io/archive/Anaconda2-5.1.0-MacOSX-x86_64.sh|Mac OSX]].
  1. For existing installations install conda 4.5.
  {{{
conda install "conda>=4.5.2" -c defaults
}}}

 1. Make sure that you have added '''anaconda2/bin''' as the '''first element''' in your '''PATH''', and that you do not have '''LD_LIBRARY_PATH''' or '''PYTHONPATH''' set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Anaconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/anaconda.

 1. '''Install dependencies''', click [[https://github.com/cryoem/eman-deps-feedstock/blob/e8c31645c2e263efeeff232a7aa8a1e7eea65479/recipe/meta.yaml#L11-L42|here]] for conda dependencies
Line 46: Line 74:
cd <path-to-eman2-source> conda create -n eman-env cmake=3.9 -c defaults
conda install -n eman-env eman-deps=14 -c cryoem -c defaults -c conda-forge

source activate eman-env
}}}

 1. Note that you will need to run {{{ source activate eman-env }}} once in each shell before being able to run EMAN2 commands.

 1. '''Checkout EMAN2 code''' from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
 {{{
cd <path-where-you-want-eman2-source> # eg - $HOME/src
Line 48: Line 86:
 }}}
 1. Install dependencies		 # this will create an eman2 folder containing the current source code from the master branch
}}}

 1. '''Create a build directory''' (out-of-source builds are recommended).
Line 51: Line 91:
conda create -n eman-env eman-deps -c cryoem -c defaults -c conda-forge # Mac
conda create -n eman-env eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
source activate eman-env
 }}}
 1. Note that you will need to run {{{ source activate eman-env }}} once in each shell before being able to run EMAN2 commands.
 1. Create a build directory (out-of-source builds are recommended). 		mkdir <build-directory> # eg- $HOME/src/eman2-build
cd <build-directory>
cmake <path-to-eman2-source> # - eg $HOME/src/eman2. On linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
   * Rerun cmake.

 1. '''Build EMAN2'''
Line 58: Line 101:
cd <build-directory>
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.
   * Rerun cmake.
 1. Build EMAN2 {{{
Line 68: Line 103:
 }}}
 1. You may also wish to run 		 }}}

 1. You may also wish to run
Line 73: Line 109:
 }}} }}}

Anaconda based Build, All Platforms

These instructions are for building with NumPy v1.13.

EMAN2 source lives on GitHub, downloading the source is part of the instructions below. Since EMAN2 uses Anaconda for its base environment, please follow the instructions below for a painless compile from source. If you go 'off script' you're on your own!

Note that even with a source build it may be difficult to get this working on systems with very old operating system installs. We normally try to support OS versions as much as 5-7 years old. Please report any problems.

GPU Support

For features which support the GPU, please complete the source install instructions below, then follow the GPU instructions from the binary installation page.

Mac OS X, Linux

There are two approaches you can use for the installation. One uses 'Miniconda' and the other uses full 'Anaconda'. Miniconda is a much smaller (~30 MB) install, provides everything EMAN2 needs, and can be expanded with more packages as you like. Anaconda is a much more complete environment (~300 MB), including useful tools such as the Jupyter notebook, but will require the use of a conda environment to make EMAN2 work properly at present.

Linux Clusters

The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the binary install page. Those instructions should also work with either of the source-based installations below.

Miniconda2

  1. Download and install Miniconda2-4.4.10 for Linux or Mac OSX.

    1. For existing installations install conda 4.5. 
      conda install "conda>=4.5.2" -c defaults

  2. Make sure that you have added miniconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.

  3. Install dependencies, click here for conda dependencies 

    conda install cmake=3.9 -c defaults
conda install eman-deps=14 -c cryoem -c defaults -c conda-forge

  4. Checkout EMAN2 code from GitHub:cryoem/eman2. 

    cd <path-where-you-want-eman2-source>   # eg - $HOME/src
git clone https://github.com/cryoem/eman2.git
# this will create an eman2 folder containing the current source code from the master branch

  5. Create a build directory (out-of-source builds are recommended). 

    mkdir <build-directory> # eg- $HOME/src/eman2-build
cd <build-directory>
cmake <path-to-eman2-source>   # - eg $HOME/src/eman2. On linux, also add -DENABLE_OPTIMIZE_MACHINE=ON

    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.

  6. Build EMAN2 

    make -j
make install
  7. You may also wish to run 
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
make test-verbose  # verbose test output to help to identify specific failures

Anaconda2

  1. Download and install Anaconda2-5.1.0 for Linux or Mac OSX.

    1. For existing installations install conda 4.5. 
      conda install "conda>=4.5.2" -c defaults

  2. Make sure that you have added anaconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Anaconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/anaconda.

  3. Install dependencies, click here for conda dependencies 

    conda create -n eman-env cmake=3.9 -c defaults
conda install -n eman-env eman-deps=14 -c cryoem -c defaults -c conda-forge

source activate eman-env

  4. Note that you will need to run  source activate eman-env  once in each shell before being able to run EMAN2 commands.

  5. Checkout EMAN2 code from GitHub:cryoem/eman2. 

    cd <path-where-you-want-eman2-source>   # eg - $HOME/src
git clone https://github.com/cryoem/eman2.git
# this will create an eman2 folder containing the current source code from the master branch

  6. Create a build directory (out-of-source builds are recommended). 

    mkdir <build-directory> # eg- $HOME/src/eman2-build
cd <build-directory>
cmake <path-to-eman2-source>   # - eg $HOME/src/eman2. On linux, also add -DENABLE_OPTIMIZE_MACHINE=ON

    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.

  7. Build EMAN2 

    make -j
make install
  8. You may also wish to run 
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
make test-verbose  # verbose test output to help to identify specific failures

EMAN2/COMPILE_EMAN2_ANACONDA-PRE-CONDA-ENVIRONMENTS (last edited 2019-11-01 14:27:54 by TunayDurmaz)