Differences between revisions 42 and 43
⇤ ← Revision 42 as of 2008-09-09 18:25:18 →
Size: 8564
Editor: DavidWoolford
Comment:
← Revision 43 as of 2008-09-09 18:26:28 → ⇥
Size: 8479
Editor: DavidWoolford
Comment:
Deletions are marked like this. Additions are marked like this.
Line 195: Line 195:
The transform function set_params is called in the Transform dictionary constructor. Constructing a Transform with some dictionary is the same as calling set_params on a Transform that is the identity. Constructing a Transform with some dictionary is the same as calling set_params on a Transform that is the identity.

TableOfContents

What is a Transform?

We use the [http://blake.bcm.edu/eman2/doxygen_html/classEMAN_1_1Transform.html Transform] class for storing/managing Euler angles,translations, scales and x mirroring. At any time a Transform object $$Tr$$ defines a group of 4 transformations of a rigid body that are applied in a specific order, namely

$$ Tr \equiv M T S R $$

Where $$M$$ is a mirroring operation about the x-axis, $$T$$ is a translation, $$S$$ is a uniform, positive, non zero scaling operation and $$R$$ is a rotation. The Transform object stores these transformations internally in a 4x4 matrix, as is commonly the case in computer graphics applications that use homogeneous coordinate systems (i.e. OpenGL). In our approach the internal 4x4 transformation matrix is constructed in this way

$$ Tr = [[sMR,M\mathbf{t}],[\mathbf{0}^T,1]]$$

Where $$s$$ is the constant scaling factor, $$M$$ is the identity or the x-mirroring matrix, $$R$$ is a $$3x3$$ rotation matrix and $$\mathbf{t}=(tx,ty,tz)^T$$ is the translation.

The Transform object in Python

Constructing a Transform

There a three ways to construct a Transform object in Python 

   1 t = Transform() # default constructor, t is the identity
   2 t = Transform({"type":"eman","az":10,"alt":150,"scale":2.0,"mirror":True,"tx":3.4}) # construction using a dictionary
   3 p = Transform({"type":"eman","az":10,"mirror":True,"tx":3.4}) # construction using a dictionary
   4 s = Transform(t) # copy construction - s is precisely the same as t

For more information on default parameters and what happens when some parameters are not set see [#dict_const a more in depth look at the dictionary constructor]

Setting/getting rotations

   1 t = Transform()
   2 t.set_rotation({"type":"spider","phi":32,"theta":12,"psi":-100})
   3 spider_rot = t.get_rotation("spider")
   4 eman_rot = t.get_rotation("eman")
   5 s = Transform(eman_rot) # works fine

Setting/getting scale

   1 t = Transform()
   2 t.set_scale(2.0)
   3 scale = t.get_scale()
   4 s = Transform({"scale":scale}) # set scale as part of construction

Setting/getting mirror

   1 t = Transform()
   2 #  Can be set using integers
   3 t.set_mirror(1) # means True
   4 t.set_mirror(0) # means False
   5 t.set_mirror(False)
   6 t.set_mirror(True)
   7 mirror = t.get_mirror()
   8 s = Transform({"mirror":mirror}) # set mirror as part of construction

Setting/getting translation

   1 t = Transform()
   2 t.set_trans(1,2,3) # method 1
   3 t.set_trans(Vec3f(1,2,3)) # method 2
   4 t.set_trans([1,2,3]) # method 3 - the tuple is converted to a Vec3f automatically
   5 v = t.get_trans()
   6 s = Transform("tx":v[0],"ty":v[1],"tz":v[2]) # set translation as part of construction

Setting/getting parameters

You can tell a Transform deduce any of its parameters from a dictionary. Similarly you can get the parameters of a Transform as a dictionary 

   1 t = Transform()
   2 t.set_params({"type":"eman","az":10,"alt":150,"scale":2.0,"mirror":True,"tx":3.4})
   3 d = t.get_params("eman") # must specify the euler convention
   4 s = Transform(d) # s is the same as t
   5 d = t.get_params("spider")
   6 s = Transform(d) # s is the same as t
   7 d = t.get_params("matrix")
   8 s = Transform(d) # s is the same as t

For more information the behaviour of set_params see [#set_params a more in depth look at set_params ]

A Transform multiplied by a Vec3f

   1 t = Transform()
   2 t.set_params({"type":"eman","az":10,"alt":150,"scale":2.0,"mirror":True,"tx":3.4})
   3 v = Vec3f(3,4,10)
   4 v_transformed = t*v
   5 v_transformed = t.transform(v) # can also do it this way if you prefer

2D degenerate use of the Transform object in Python

The Transform object can be used as though it were a 2D transformation matrix. In this case the interface for setting/getting scale and mirror is unchanged. However setting the rotation should be done using the euler type "2d", and there are some accommodations for setting and getting 2d translations and parameters.

Setting/getting 2D rotations

Use the "2d" euler type, and the angle is specified using "alpha" 

   1 t = Transform()
   2 t.set_rotation({"type":"2d","alpha":32})
   3 a = t.get_rotation("2d")
   4 s = Transform(a) # works fine

Setting/getting 2D translation

The interface is more or less identical to the 3D case 

   1 t = Transform()
   2 t.set_trans(1,2) # method 1
   3 t.set_trans(Vec2f(1,2)) # method 2
   4 v = t.get_trans_2d()
   5 s = Transform("tx":v[0],"ty",v[1]) # set translation as part of construction

Setting/getting 2D parameters

For getting the parameters in 2D form use the following 

   1 t = Transform()
   2 t.set_params({"type":"2d","alpha":10,"scale":2.0,"mirror":True,"dx":3.4,"dy":0.0}) # no special interface required for 2D, use the same as 3D
   3 d = t.get_params("2d")
   4 s = Transform(d) # s is the same as t

A Transform multiplied by a Vec2f

The interface is precisely the same as the interface for a Transform multiplied by a Vec3f 

   1 t = Transform()
   2 t.set_params({"type":"2d","alpha":10,"scale":2.0,"mirror":True,"tx":3.4})
   3 v = Vec2f(3,1)
   4 v_transformed = t*v
   5 v_transformed = t.transform(v) # can also do it this way if you prefer

Anchor(dict_const)

A more in depth look at the dictionary constructor

The dictionary constructor, which is equivalent to calling the default constructor followed by the set_params function, takes up to 9 parameters as exemplified in the following 

   1 t = Transform({"type":"eman","az":10,"alt":150,"phi":20,"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2})
   2 t = Transform({"type":"spider","phi":10,"theta":150,"psi":20,"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2})

If any of the angles or not specified they are implicitly set to 0 

   1 t = Transform({"type":"spider","phi":10,"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2}) # spider theta and psi are both 0
   2 t = Transform({"type":"spider","scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2}) # spider phi, theta and psi are all 0

If no euler type is specified then the rotation matrix is the identity 

   1 t = Transform({"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2}) # Rotation matrix is the identity

Similarly if any of the translation parameters are not specified they are implicitly set to 0 

   1 t = Transform({"scale":2.0,"mirror":True,"tx":3.4,"ty":3}) # tz is 0
   2 t = Transform({"scale":2.0,"mirror":True}) # tx,ty and tz are all 0

If scale is not specified it is by default 1.0, similarly if mirror is not specified it is be default False 

   1 t = Transform({"tx":3.4,"ty":3,"tz":3}) # scale is 1.0, mirror is False

Anchor(set_params)

A more in depth look at set_params

Constructing a Transform with some dictionary is the same as calling set_params on a Transform that is the identity. 

   1 d = {"type":"eman","az":10,"alt":150,"phi":20,"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2}
   2 t = Transform(d) # t is initialized as the identity and then set_params(d) is called internally
   3 s = Transform() # s is the identity
   4 s.set_params(d) # s is identical to t

The main difference between calling set_params explicitly on a Transform as opposed to constructing a Tranform with a dictionary lies in the fact that the construction method first sets the Transform object to the identity before calling set_params. So if calling the set_params function on a Transform that has already been initialized and had many things done than you should be aware of the following...

If unspecified, old parameters are retained

   1 t = Transform({"type":"eman","az":10,"alt":150,"phi":20,"scale":2.0,"mirror":True,"tx":3.4,"ty":3,"tz":2})
   2 d = {"tx":23,"ty":23,"tz":12}
   3 t.set_params(d) # t still has the same rotation, scale and mirror but it has an updated translation

For rotation and translation, setting one is equivalent to setting them all

   1 t = Transform({"tx":3.4,"ty":3,"tz":2})
   2 d = {"tx":23}
   3 t.set_params(d) # ty and tz are now 0
   4 #
   5 t = Transform({"type":"eman","az":10,"alt":150,"phi":20})
   6 d = {"type":"eman","phi":10}
   7 t.set_params(d) # alt and az are 0
   8 t.set_params({"type":eman}) # all angles are now 0

EMAN2/TransformInPython (last edited 2023-09-29 12:51:26 by SteveLudtke)